Description Meet the HKS Fab 2-Tier MINI Modular Battery Storage — a compact, heavy-duty solution built to keep your shop organized without wasting wall space. Designed around our MINI 2-Tier Backplate, this system mounts directly to your wall and securely holds two batteries on the top tier and two on the bottom, giving you quick, visible access to your most-used power packs. Whether you’re running one brand or mixing setups across multiple tool lines, the MINI modular platform lets you custom-configure each tier independently. Mount your favorite combo — Milwaukee M18 up top and DeWalt 20V below, or maybe Makita 18V paired with Craftsman 20V — the choice is yours. Precision-cut from 14-gauge American steel and CNC-bent for strength, every unit is built to handle daily shop abuse. The wall plate features clean, slotted mounting holes for quick installation on standard stud spacing or metal pegboard setups. It’s compact, versatile, and 100% Made in the USA — engineered for professionals who demand organized efficiency from every inch of their workspace. Configuration Options The 2-Tier MINI Modular Battery Storage system supports interchangeable modules for a wide range of tool brands. Each tier can be outfitted independently with any combination of two-battery mounts from the following options: Milwaukee® M18 – 2 Battery Module Milwaukee® M12 – 2 Battery Module DeWalt® 20V – 2 Battery Module Makita® 18V – 2 Battery Module Craftsman® 20V – 2 Battery Module HART® 20V – 2 Battery Module Hercules® 20V – 2 Battery Module Hyper Tough® 20V – 2 Battery Module Ryobi® 18V – 2 Battery Module Bauer® 20V – 2 Battery Module RIDGID® 18V – 2 Battery Module Each brand-specific module slides into the MINI Backplane using our precision-fit modular slots and secures with hardware for a tight, rattle-free connection. Mix and match tiers to build a dual-brand charging wall that fits your workflow. Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L7.5" x W6" x H6" BATTERIES NOT INCLUDED

Description Take your modular setup to the next level with the HKS Fab 2-Tier MAX Modular Battery Storage — the ultimate high-capacity system for serious builders, mechanics, and pros. Based on our precision-cut 2-Tier Backplane, this configuration holds four batteries per tier (eight total batteries per unit) while allowing you to customize each level for different power-tool brands — or swap the bottom tier for our 3-Tool Holder Module to keep your drills, drivers, or impacts close at hand. Built from 14-gauge American steel, CNC-cut and bent for a precise, heavy-duty fit, the MAX system delivers rugged durability in a clean, space-efficient design. Each tier mounts securely using our modular slide-lock interface and installs easily with slotted wall holes for standard stud spacing or metal panels. Whether you’re running full Milwaukee M18s on top and DeWalt 20Vs below — or any mix of brands — the MAX system gives you true multi-brand flexibility in one tough, American-made platform. Proudly Made in the USA by HKS Fab. Configuration Options The 2-Tier MAX Modular Battery Storage system lets you build your perfect setup using any combination of modules below. Each tier can be configured independently: Modular Tool Holder – Holds up to 3 Power Tools (Bottom Tier Only) Milwaukee® M18 – 4 Battery Module Milwaukee® M12 – 4 Battery Module DeWalt® 20V – 4 Battery Module Makita® 18V – 4 Battery Module Craftsman® 20V – 4 Battery Module HART® 20V – 4 Battery Module Hercules® 20V – 4 Battery Module Hyper Tough® 20V – 4 Battery Module Ryobi® 18V – 4 Battery Module Bauer® 20V – 4 Battery Module RIDGID® 18V – 4 Battery Module Each brand-specific module locks into the backplane for a tight, rattle-free fit, giving you the freedom to mix brands, tools, and tiers exactly how you work. Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L14" x W6" x H6" BATTERIES NOT INCLUDED

Description Keep your RIDGID tools powered up and ready with the RIDGID 18V Locking Battery Charging Station. Designed for everyday use, this wall-mounted rack organizes your RIDGID 18V charger and batteries in one clean, efficient setup. Eliminate clutter from your workbench, secure your batteries with confidence, and grab power at a glance. From the garage to the workshop or even a mobile trailer, this charging station delivers dependable storage and organization that keeps your tools charged and your workflow on track. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) RIDGID 18v Batteries, (1) Charger. Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS & BATTERY NOT INCLUDED  

Description Built for Milwaukee users who demand strength and order, the Milwaukee M12 Battery Charging Station This wall-mounted rack secures your Milwaukee M12 charger and batteries in one streamlined layout, eliminating bench clutter and keeping your workflow efficient. Perfect for garages, professional shops, or mobile setups, this steel charging station keeps your batteries locked in, visible, and always ready to go. No more wasted time digging through drawers or toolboxes — just fast, secure access to the power you need. The Milwaukee M12 Battery Charging Station keeps your charger + up to 10 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (10) Milwaukee M12 Batteries, (1) Charger. Compatible with M12 & M12 Extended Batteries Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED

Description Built for Milwaukee users who demand strength and order, the Milwaukee M18 Locking Battery Charging Station This wall-mounted rack secures your Milwaukee M18 charger and batteries in one streamlined layout, eliminating bench clutter and keeping your workflow efficient. Perfect for garages, professional shops, or mobile setups, this steel charging station keeps your batteries locked in, visible, and always ready to go. No more wasted time digging through drawers or toolboxes — just fast, secure access to the power you need. The Milwaukee M18 Locking Battery Charging Station keeps your charger + up to 8 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) Milwaukee M18 Batteries, (1) Charger. Compatible with M18  Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED

Description Keep your Craftsman tools powered up and organized with the Craftsman 20V Locking Battery Charging Station. This wall-mounted rack is built to handle daily shop use while securing your Craftsman 20V charger and batteries in one efficient layout. This rack clears bench space, eliminates clutter, and keeps your workflow moving. With locking battery slots, your power stays put — whether in a garage, workshop, or mobile setup. No more lost batteries or tangled cords, just clean organization that works as hard as you do. The Craftsman Locking Battery Charging Station keeps your charger + up to 8 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) Craftsman 20v Batteries, (1) Charger. Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED

Description Built for serious DeWalt users, the DeWalt Locking Battery Charging Station This wall-mounted rack secures your DeWalt charger and 8 batteries in one organized layout, keeping your workspace efficient and clutter-free. Whether you’re outfitting a garage, shop, or mobile setup, this steel charging station keeps your batteries locked in, visible, and ready when you need them. No more digging through drawers or toolboxes — just fast, reliable access to your gear. The DeWalt Locking Battery Charging Station keeps your charger + up to 8 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) DeWalt 20V Batteries, (1) Charger. Compatible with 20-Volt MAX, and FLEXVOLT Compatible with Standard & 6amp DeWalt Chargers Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED

Description Power up and organize both your Milwaukee platforms with the Milwaukee M18 Locking & M12 Battery Charging Station. CNC-cut from heavy-duty cold-rolled steel, this wall-mounted rack is designed to secure your Milwaukee chargers and batteries in one clean, efficient layout. Eliminate bench clutter and keep your workflow moving — with locking battery slots that hold your packs tight, visible, and ready when you are. Whether in a garage, pro-level shop, or mobile setup, this charging station is built to deliver dependable organization that works as hard as your tools. The Milwaukee M18 Locking and M12 Battery Charging Station keeps your charger + up to 9 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (4) Milwaukee M18 Locking & (5) M12 Batteries, (1) Charger. Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED

Description Stay organized and keep your Makita tools ready with the Makita 18V Battery Organizer & Charging Station. This wall-mounted rack is built to last while keeping your Makita 18V charger and batteries in one clean, efficient layout. Designed for garages, professional shops, or mobile setups, this charging station saves bench space, secures your batteries in place, and makes them easy to grab when you need them. No more clutter, no more searching — just fast, reliable access to your power. The Makita Locking Battery Charging Station keeps your charger + up to 8 batteries secure, visible, and always within reach. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) Makita18v Batteries, (1) Charger. Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" Battery & Charger NOT INCLUDED

Description Take your Hercules setup to the next level with the Hercules 20V Battery Organizer & Charging Station. This wall-mounted rack is built to handle daily shop use while keeping your Hercules chargers and batteries in one clean, efficient layout. Designed to clear clutter and keep your workflow streamlined, this steel organizer locks your batteries in place and makes them easy to grab at a glance. Whether you’re in a garage, pro-level shop, or mobile setup, it’s the no-nonsense storage upgrade that saves time and space. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Rack Capacity – (8) Hercules 20V Batteries, (1) Charger. Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L22.5" x W6" x H6" TOOLS NOT INCLUDED  

Description Streamline your workspace with the 2-Tier Power Tool Organizer Base Unit from HKS Fab — a durable, space-saving solution designed to keep your most-used tools, batteries, and accessories organized and within reach. This compact unit features two heavy-duty tiers. The top shelf is perfect for storing drill bit sets, batteries, and chargers, while the bottom shelf securely holds up to five power tools. Built for long-term use in garages, workshops, or mobile setups, it’s the durable storage solution your workspace needs. For added versatility, optional accessory wings can be mounted to the top shelf only — one on each side — allowing you to customize your setup for your workflow. Wings are sold separately, letting you expand as your tool collection grows. Compatible accessories include: Milwaukee M12 Battery Holder Wing – holds (3) compact or (2) extended 12 V batteries Grinder Holder Wing – secures your grinder upright for quick access Grinder Accessories Wing – keeps discs, wheels, and attachments neatly organized Build your ideal tool storage system — one shelf and one wing at a time. Features Cut from 14 gauge cold rolled steel CNC Cut / CNC Bent Compatible Milwaukee, Rigid, Craftsman, Ryobi, Porter Cable, Makita & so much more Perfect for storing power tools, batteries, tool parts, and accessories like drill bits Made in the USA by HKS Fab Installs easily with basic hand tool Made in the USA by HKS Fab L-21" x D-8" x H-8" ONLY 2 TIER SHELF INCLUDED

Description Stop propping your torches in corners or burying them in drawers. The HKS Fab Propane Torch Holder gives your gear the solid, secure spot it deserves. Built from CNC-cut steel and designed for everyday use, this wall-mounted rack keeps MAP-Pro torches, propane torches, or soldering setups upright, organized, and ready to grab. No more tip-overs, no wasted time searching—just clean, dependable storage that works as hard as you do. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab TORCH NOT INCLUDED  

Description Get your wrench lineup fully organized with the HKS Fab SAE & Metric Wrench Holder Bundle — the ultimate setup for any shop or garage. This bundle includes both our SAE Wrench Holder and Metric Wrench Holder, designed to mount side-by-side on your wall or tool cart. Each rack features precision-cut steel hooks that hold wrenches individually or in groups, keeping your full set visible, easy to grab, and off the workbench. Built from CNC-cut 14-gauge steel, these racks are made to last a lifetime. Whether you’re a weekend wrench-turner or a professional tech, this bundle brings order, efficiency, and a clean, pro-level look to your workspace. 💥 Bundle & Save: Get both wrench holders together and save compared to buying individually. Keep your entire wrench set organized with one simple, American-made solution. Features ✅ Includes both SAE & Metric racks✅ Wall or cart-mount compatible✅ CNC-cut from 14-gauge steel✅ Made in the USA ✅ L-20 1/2" x D-3" x H-2 1/4" TOOLS NOT INCLUDED

Description Keep your SAE wrenches neatly arranged and always within reach with this heavy-duty wall or cart-mounted rack. It’s built to handle everyday shop use while looking professional in any workspace. Each precision-spaced hook securely holds individual wrenches or grouped sets, so you can quickly grab the exact size you need. Like the rest of HKS Fab’s organization line, this rack is proudly made in the USA and designed to mount easily on tool carts, shop walls, or pegboard systems. Pair it with our Metric Wrench Rack or Power-Tool Shelving to create a fully coordinated storage solution that maximizes efficiency and keeps your shop bench clear. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Room for 15 teeth to keep your SAE wrenches organized and easy to grab. Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 TOOLS NOT INCLUDED Upgrade your shop organization and save time with every project — built tough by HKS Fab

Description Keep your Metric wrenches neatly arranged and always within reach with this heavy-duty wall or cart-mounted rack. It’s built to handle everyday shop use while looking professional in any workspace. Each precision-spaced hook securely holds individual wrenches or grouped sets, so you can quickly grab the exact size you need. Like the rest of HKS Fab’s organization line, this rack is proudly made in the USA and designed to mount easily on tool carts, shop walls, or pegboard systems. Pair it with our Metric Wrench Rack or Power-Tool Shelving to create a fully coordinated storage solution that maximizes efficiency and keeps your shop bench clear. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Room for 15 teeth to keep your Metric wrenches organized and easy to grab. Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 TOOLS NOT INCLUDED

Description Upgrade your workspace with the HKS Fab Universal Plier Rack. This sleek wall-mounted organizer keeps your screwdrivers secure, visible, and always within reach—ideal for both DIY enthusiasts and professionals. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Room for 15 pair of plier organized and easy to grab. Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 TOOLS NOT INCLUDED  

Description Upgrade your workspace with the HKS Fab Universal Screwdriver Rack. This sleek wall-mounted organizer keeps your screwdrivers secure, visible, and always within reach—ideal for both DIY enthusiasts and professionals. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Room for 25 Screwdrivers – Custom-cut slots keep Phillips, flathead, and more neatly organized and easy to grab. Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 TOOLS NOT INCLUDED

Description Take your shop setup to the next level with our Super-Strong Rubber-Coated Neodymium Magnet 8-Pack. These heavy-duty magnets provide serious holding power while the rubber coating keeps surfaces safe and slip-free. Designed to work seamlessly with HKS Fab tool organizers, these magnets let you mount racks, holders, and accessories wherever you need them — no drilling required. Perfect for carts, metal walls, or mobile setups, they keep your gear secure, organized, and always within reach. Features 8-pack of ultra-strong neodymium magnets Rubber-coated for non-slip, surface-safe grip Compatible with HKS Fab organizers & racks Quick, drill-free mounting option for shop carts or metal walls Built tough for pro shops and home garages Upgrade your shop organization and save time with every project. WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Description Keep your spray guns organized and protected with the HKS Fab Gravity Feed Spray Gun Holder Rack.Designed and CNC-cut in the USA, this heavy-duty steel rack safely stores up to three gravity-feed spray guns and mounts securely to either a wall or a rolling cart—perfect for auto-body shops, woodworking studios, and custom paint booths. Versatile Mounting: Wall-mount or cart-mount to fit your workspace. Secure & Stable: Precision-cut slots prevent tipping or scratches. Built to Last: CNC-cut steel stands up to daily shop use. Space-Saving Design: Keeps your guns off the bench and ready for action. Perfect for automotive, woodworking, or custom-paint shops that demand HKS Fab quality and efficiency. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab TOOLS NOT INCLUDED

Description   Keep your clamps and vise grips neatly organized with this sturdy tool mount. Designed to hold up to 10 tools, it features mounting holes spaced 16 inches on center plus an additional center hole for secure installation. The slots accommodate 3/4” or 5/8” Vise Grip tools for a perfect fit. Ideal for workshops and garages, this mount keeps your tools accessible and your workspace clutter-free. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Compatible with 3/4” or 5/8” Vise Grip Tools Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 | Note product pictured H3" Backplate may still ship  TOOLS NOT INCLUDED

Description Keep your workspace organized and efficient with this sturdy Pry Bar Tool Mount. Designed to hold up to 10 pry bar tools, it features precision-cut slots that accommodate bars up to 1/8" thick. The mounting holes are spaced 16 inches on center for easy installation, with an additional center hole for extra support and stability. Perfect for garages, workshops, or job sites—get your tools off the bench and onto the wall where they’re easy to grab and go. .Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Compatible with up to 1/8in” Pry Bar Tools Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 | Note product pictured H3" Backplate may still ship TOOLS NOT INCLUDED

Description 3-Tier Power Tool Organizer Base Unit – Modular Storage for Tools, Batteries & Accessories Maximize your workspace with our 3-Tier Power Tool Organizer Base Unit, designed to neatly store your power tools along with their batteries, chargers, and accessories. The sturdy, space-saving design keeps everything in one place for quick access and improved efficiency. For expanded storage, optional accessory wings can be added—up to two per side, allowing a total of four wings per base unit. Wings are sold separately, giving you the flexibility to customize your setup to match your needs. Perfect for garages, workshops, or mobile setups—build your ideal tool storage system, one unit at a time. Milwaukee 3 slot small 12v or 2 large 12v battery holder Grinder holder  grinder accessories Features Cut from 14 gauge cold rolled steel CNC Cut / CNC Bent Compatible Milwaukee, Rigid, Craftsman, Ryobi, Porter Cable, Makita & so much more Perfect for storing power tools, batteries, tool parts, and accessories like drill bits Made in the USA by HKS Fab Installs easily with basic hand tool Measures H14" x L22" x D9" Made in the USA by HKS Fab TOOLS NOT INCLUDED

Description Heavy-Duty Lower Splash Shield / Gravel Shield – 14-Gauge Steel Protection Upgrade your truck with our Lower Splash Shield / Gravel Shield, designed to replace the flimsy factory plastic guard that covers the lower engine bay and cooling stack. Crafted from 14-gauge steel, this kit offers superior strength, extended coverage, and enhanced protection for the underside of your truck—all while delivering a clean, professional look. Easy to install using existing factory mounting points. Proudly Made in the USA for quality and durability you can trust. ***Confirmed fitment with stock height and leveled trucks. If your truck has a suspension lift, please email before ordering to confirm compatibility with your aftermarket suspension components.***   Features Constructed from 14g steel CNC Cut / CNC Bent Uses OEM mounting points Provides additional front coverage area vs. OEM part Compatible with Gas and Diesel engine HD model trucks Installs easily with basic hand tool Made in the USA by HKS Fab

Description Heavy-Duty Lower Splash Shield / Gravel Shield – 14-Gauge Steel Protection Upgrade your truck with our Lower Splash Shield / Gravel Shield, designed to replace the flimsy factory plastic guard that covers the lower engine bay and cooling stack. Crafted from 14-gauge steel, this kit offers superior strength, extended coverage, and enhanced protection for the underside of your truck—all while delivering a clean, professional look. Easy to install using existing factory mounting points. Proudly Made in the USA for quality and durability you can trust. ***Confirmed fitment with stock height and leveled trucks. If your truck has a suspension lift, please email before ordering to confirm compatibility with your aftermarket suspension components.***   Features Constructed from 14g steel CNC Cut / CNC Bent Uses OEM mounting points Provides additional front coverage area vs. OEM part Installs easily with basic hand tool Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Description Heavy-Duty Lower Splash Shield / Gravel Shield – 14-Gauge Steel Protection Upgrade your truck with our Lower Splash Shield / Gravel Shield, designed to replace the flimsy factory plastic guard that covers the lower engine bay and cooling stack. Crafted from 14-gauge steel, this kit offers superior strength, extended coverage, and enhanced protection for the underside of your truck—all while delivering a clean, professional look. Easy to install using existing factory mounting points. Proudly Made in the USA for quality and durability you can trust. ***Confirmed fitment with stock height and leveled trucks. If your truck has a suspension lift, please email before ordering to confirm compatibility with your aftermarket suspension components.*** Features Constructed from 14g steel This front splash guard kit will NOT fit AT4X / ZR2 trucks CNC Cut / CNC Bent Uses OEM mounting points Provides additional front coverage area vs. OEM part Installs easily with basic hand tool Made in the USA by HKS Fab Year Make Model Chassis & Suspension2020 Chevrolet / GMC 6.6L Duramax2021 Chevrolet / GMC 6.6L Duramax2022 Chevrolet / GMC 6.6L Duramax2023 Chevrolet / GMC 6.6L Duramax2024 Chevrolet / GMC 6.6L Duramax2025 Chevrolet / GMC 6.6L Duramax          

Description There’s a language every gearhead speaks — and in the garage, you don’t need words to explain it.This shirt says it all: “Garage – The Only Place in the World Where Nothing Has to Be Explained.” Perfect for weekend wrench sessions, long nights in the shop, or just letting the world know where you belong. Soft, durable, and made for everyday wear — it’s a must-have for anyone who lives the garage life. Made from soft, comfortable cotton and built for everyday wear in the shop, garage, or on the weekend.  ✅ Classic fit and Lightweight comfort✅ Perfect for shop days or casual wear✅ Available in multiple sizes✅ Designed and printed in the USA Apparel Shipping Notice: All apparel items are printed and shipped by a third-party fulfillment partner. Apparel orders will not ship together with products made by HKS Fab LLC. Any apparel purchased will arrive in a separate shipment. Product features The Bella Canvas 3001 is a classic unisex jersey short sleeve tee that fits like a well-loved favorite. Soft cotton and quality print make users fall in love with it over and over again. These t-shirts have ribbed knit collars to bolster shaping. The shoulders are tapered for a better fit over time, and dual side seams hold the garment's shape for longer. .: Made with 100% Airlume combed and ring-spun cotton, the Bella Canvas 3001 is a lightweight fabric (4.2 oz/yd² (142 g/m²)) that's breathable and easy to layer. Perfect for active and leisure wear..: The retail fit that is perfect for casual and semi-formal settings. The crew neckline adds a classic, neat style that's perfect for accessorizing..: Bella+Canvas manufactures all its products in the US and internationally in humane, no-sweat-shop, sustainable way and is part of the Fair Labor Association as well as Platinum WRAP certified. .: The tear-away label minimizes skin irritations..: Fabric blends: Ash and Heather Prism colors - 99% cotton, 1% polyester; Heather and Solid Blend colors - 52% cotton, 48% polyester; Athletic Heather and Black Heather - 90% cotton, 10% polyester. Size Chart   XS S M L XL 2XL 3XL 4XL Width, in 16.50 18.00 20.00 22.00 24.00 26.00 28.00 30.00 Length, in 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 Sleeve length, in 8.60 8.90 9.20 9.50 9.70 10.00 10.40 10.80 Size tolerance, in 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50  

Description Simple. Bold. Straight to the point. The HKS Fab – Clean Hoodie keeps it classic with our logo front and center — no flash, no clutter, just clean design that reps American-made craftsmanship and hard work. Made from soft, comfortable cotton and built for everyday wear in the shop, garage, or on the weekend.  ✅ Classic fit and Heavyweight comfort✅ Bold “HKS FAB” logo front print with Vertical Logo and Slogan Centered vertically on the back✅ Perfect for shop days or casual wear✅ Available in multiple sizes✅ Designed and printed in the USA Apparel Shipping Notice: All apparel items are printed and shipped by a third-party fulfillment partner. Apparel orders will not ship together with products made by HKS Fab LLC. Any apparel purchased will arrive in a separate shipment. Product features The Gildan Heavy Blend™ hoodie, made from a soft cotton-poly blend, provides warmth and durability. Its unisex fit offers everyday versatility, with ribbed cuffs and hem to keep the shape intact. A large front pocket adds convenience, while the double-lined hood with matching drawcord gives it a clean, cohesive look. Trusted for custom printing and casual wear, the Gildan 18500 is a reliable choice that balances comfort and longevity.Disclaimer:- Due to the fabric properties, the White color variant may appear off-white rather than bright white. .: The Gildan 18500 is made from a medium-heavy fabric (8.0 oz/yd² (271 g/m²)) made of 50% cotton and 50% polyester. This blend delivers cozy warmth and a soft feel that makes it perfect for chilly days..: The classic fit along with the pouch pocket and the tear-away label make for a highly comfortable, scratch-free wearing experience. .: The color-matched drawcord and the double-lined hood add a stylish flair and durability that tie everything together..: Made using 100% ethically grown US cotton. Gildan is also a proud member of the US Cotton Trust Protocol ensuring ethical and sustainable means of production. The blank tee's dyes are OEKO-TEX-certified dyes with low environmental impact..: Fabric blends: Heather Sport colors - 60% polyester, 40% cotton.: Embroidery decoration method available on either left chest, center chest, or large center chest, as well as right + left wrists EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY Product information: Gildan 18500, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC Warnings, Hazard: For adults, Made in Bangladesh Care instructions: Machine wash: cold (max 30C or 90F), Non-chlorine: bleach as needed, Tumble dry: medium, Iron, steam or dry: low heat, Do not dryclean

Description Simple. Bold. Straight to the point. The HKS Fab – Vert T keeps it classic with our logo front and center — no flash, no clutter, just clean design that reps American-made craftsmanship and hard work. Made from soft, comfortable cotton and built for everyday wear in the shop, garage, or on the weekend.  ✅ Classic fit and Heavyweight comfort✅ Bold “HKS FAB” logo front print with Vertical Logo and Slogan Centered vertically on the back✅ Perfect for shop days or casual wear✅ Available in multiple sizes✅ Designed and printed in the USA Apparel Shipping Notice: All apparel items are printed and shipped by a third-party fulfillment partner. Apparel orders will not ship together with products made by HKS Fab LLC. Any apparel purchased will arrive in a separate shipment. Product features The Bella Canvas 3001 is a classic unisex jersey short sleeve tee that fits like a well-loved favorite. Soft cotton and quality print make users fall in love with it over and over again. These t-shirts have ribbed knit collars to bolster shaping. The shoulders are tapered for a better fit over time, and dual side seams hold the garment's shape for longer. .: Made with 100% Airlume combed and ring-spun cotton, the Bella Canvas 3001 is a lightweight fabric (4.2 oz/yd² (142 g/m²)) that's breathable and easy to layer. Perfect for active and leisure wear..: The retail fit that is perfect for casual and semi-formal settings. The crew neckline adds a classic, neat style that's perfect for accessorizing..: Bella+Canvas manufactures all its products in the US and internationally in humane, no-sweat-shop, sustainable way and is part of the Fair Labor Association as well as Platinum WRAP certified. .: The tear-away label minimizes skin irritations..: Fabric blends: Ash and Heather Prism colors - 99% cotton, 1% polyester; Heather and Solid Blend colors - 52% cotton, 48% polyester; Athletic Heather and Black Heather - 90% cotton, 10% polyester. Size Chart   XS S M L XL 2XL 3XL 4XL Width, in 16.50 18.00 20.00 22.00 24.00 26.00 28.00 30.00 Length, in 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 Sleeve length, in 8.60 8.90 9.20 9.50 9.70 10.00 10.40 10.80 Size tolerance, in 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50  

Description Simple. Bold. Straight to the point. The HKS Fab – Clean Hoodie keeps it classic with our logo front and center — no flash, no clutter, just clean design that reps American-made craftsmanship and hard work. Made from soft, comfortable cotton and built for everyday wear in the shop, garage, or on the weekend.  ✅ Classic fit and Heavyweight comfort✅ Bold “HKS FAB” logo front print✅ Perfect for shop days or casual wear✅ Available in multiple sizes✅ Designed and printed in the USA Apparel Shipping Notice: All apparel items are printed and shipped by a third-party fulfillment partner. Apparel orders will not ship together with products made by HKS Fab LLC. Any apparel purchased will arrive in a separate shipment. Features Disclaimer:- Due to the fabric properties, the White color variant may appear off-white rather than bright white. .: The Gildan 18500 is made from a medium-heavy fabric (8.0 oz/yd² (271 g/m²)) made of 50% cotton and 50% polyester. This blend delivers cozy warmth and a soft feel that makes it perfect for chilly days..: The classic fit along with the pouch pocket and the tear-away label make for a highly comfortable, scratch-free wearing experience. .: The color-matched drawcord and the double-lined hood add a stylish flair and durability that tie everything together..: Made using 100% ethically grown US cotton. Gildan is also a proud member of the US Cotton Trust Protocol ensuring ethical and sustainable means of production. The blank tee's dyes are OEKO-TEX-certified dyes with low environmental impact..: Fabric blends: Heather Sport colors - 60% polyester, 40% cotton.: Embroidery decoration method available on either left chest, center chest, or large center chest, as well as right + left wrists Size Chart   S M L XL 2XL 3XL 4XL 5XL Width, in 20.08 22.05 24.02 25.98 27.99 29.92 31.89 33.86 Length, in 27.17 27.95 29.13 29.92 31.10 31.89 33.07 33.86 Sleeve length from center back, in 33.50 34.50 35.50 36.50 37.50 38.50 39.50 40.50 Size tolerance, in 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50