Description Tired of air tools scattered in drawers and taking up space? Our Air Tool Organizer is the perfect solution to declutter your garage or workshop. This sturdy mount securely holds up to 14 air tools, keeping them visible, organized, and easy to grab when you need them. Quick to install and designed for convenience, it’s the smart way to keep your workspace tidy and efficient. Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Compatible with 3/4 fittings Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 | Note product pictured H3" Backplate may still ship TOOLS NOT INCLUDED

Description Keep your workspace organized and efficient with this sturdy Pry Bar Tool Mount. Designed to hold up to 10 pry bar tools, it features precision-cut slots that accommodate bars up to 1/8" thick. The mounting holes are spaced 16 inches on center for easy installation, with an additional center hole for extra support and stability. Perfect for garages, workshops, or job sites—get your tools off the bench and onto the wall where they’re easy to grab and go. .Upgrade your shop organization and save time with every project — built tough by HKS Fab Features CNC Cut / CNC Bent Constructed from 14g steel Compatible with up to 1/8in” Pry Bar Tools Installs easily with basic hand tools Made in the USA by HKS Fab L-20 1/2" x D-3" x H-2 1/4 | Note product pictured H3" Backplate may still ship TOOLS NOT INCLUDED

Space-Saving Jack Stand Brackets – Store Your Jack Stands Neatly & Securely Our specially designed brackets hold your jack stands at a slight angle, reducing how far they protrude from the wall. This smart design lets you stack jack stands closely together, maximizing your wall space and keeping your garage or workshop floor clear and clutter-free. Durable and easy to install, these individual brackets help you organize efficiently while protecting your jack stands from damage.   CNC Cut / CNC Bent Constructed from 14g steel Compatible with 6 ton jack stands Installs easily with basic hand tools Made in the USA by HKS Fab TOOLS NOT INCLUDED   WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Space-Saving Jack Stand Brackets – Store Your Jack Stands Neatly & Securely Our specially designed brackets hold your jack stands at a slight angle, reducing how far they protrude from the wall. This smart design lets you stack jack stands closely together, maximizing your wall space and keeping your garage or workshop floor clear and clutter-free. Durable and easy to install, these individual brackets help you organize efficiently while protecting your jack stands from damage.            CNC Cut / CNC Bent          Constructed from 14g steel         Compatible with 2 and 3 ton jack stands         Installs easily with basic hand tools         Made in the USA by HKS Fab TOOLS NOT INCLUDED WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Our Weld Bottle Grinder & Accessories Holder Kit keeps your grinder off the bench and neatly organized! Increase your efficiency by knowing exactly where your tools and equipment are stored!   CNC Cut / CNC Bent Constructed from 14g steel Compatible with grinder up to a 5" disk Installs easily with basic hand tool Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

The Grinder Holder Accessories Wing Attachment is designed for the HKS Fab Power Tool 3-Tier Shelf “Base Unit,” providing a secure and convenient storage solution for your grinder.   Constructed from 14g steel CNC Cut / CNC Bent Sold individually as an addition Compatible with grinding discs up to a 5" disk Installs easily with basic hand tool Made in the USA by HKS Fab TOOLS NOT INCLUDED WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Our Weld Bottle Attachment is designed to work seamlessly with the attachments listed below, with more options coming soon. Currently compatible with:Grinder & Accessories Holder – sold separately   Sold individually as an addition CNC Cut / CNC Bent Constructed from 14g steel Compatible with grinder up to a 5" disk Installs easily with basic hand tool Made in the USA by HKS Fab TOOLS NOT INCLUDED WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

This is our Milwaukee M12 Wing Attachment, designed for the HKS Fab Power Tool 3-Tier Shelf “Base Unit.” The wing features three precision-cut slots that can securely hold either three Milwaukee M12 compact batteries or two Milwaukee M12 extended batteries.   Sold individually as an addition CNC Cut / CNC Bent Constructed from 14g steel Compatible with Milwaukee M12 batteries Installs easily with basic hand tool Made in the USA by HKS Fab TOOLS NOT INCLUDED WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Drop-In Lift Tool Organizer – Keep Accessories Off the Floor and Within Reach Designed for two-post automotive lifts, this drop-in style holder keeps your lift tool accessories neatly organized and off the floor. It also functions as an extension and puck holder, providing easy access to essential items right where you need them.   Constructed from 14g steel CNC Cut / CNC Bent Includes two 6 piece holders Left and Right Includes 1/4in mounting hardware Compatible with 2 post automotive lift Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.  

Automotive Lift Arm Shelf – Convenient Storage for Tools & Small Parts Keep your essential tools and small parts within easy reach with our durable automotive lift arm shelf. Designed to attach securely to your lift arm, it provides a handy, accessible workspace so you can stay organized and efficient while working on vehicles.   Constructed from 14g steel CNC Cut / CNC Bent Includes two 6 piece holders Left and Right Includes 1/4in mounting hardware Compatible with 2 or 4 post automotive lift Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Our Weld Bottle attachment can be used with the below attachment's. Current available attachment's with more to come! Grinder & Accessories Holder - Purchased separately    CNC Cut / CNC Bent Constructed from 14g steel Compatible with grinder up to a 5" disk Installs easily with basic hand tool Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Our wall mounted Grinder & Accessories Holder keeps your grinder off the bench and neatly organized! Increase your efficiency by knowing exactly where your tools and equipment are stored!   CNC Cut / CNC Bent Constructed from 14g steel Compatible with grinder up to a 5" disk Installs easily with basic hand tool Made in the USA by HKS Fab WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Description Get your wrench lineup fully organized with the HKS Fab SAE & Metric Wrench Holder Bundle — the ultimate setup for any shop or garage. This bundle includes both our SAE Wrench Holder and Metric Wrench Holder, designed to mount side-by-side on your wall or tool cart. Each rack features precision-cut steel hooks that hold wrenches individually or in groups, keeping your full set visible, easy to grab, and off the workbench. Built from CNC-cut 14-gauge steel, these racks are made to last a lifetime. Whether you’re a weekend wrench-turner or a professional tech, this bundle brings order, efficiency, and a clean, pro-level look to your workspace. 💥 Bundle & Save: Get both wrench holders together and save compared to buying individually. Keep your entire wrench set organized with one simple, American-made solution. Features ✅ Includes both SAE & Metric racks✅ Wall or cart-mount compatible✅ CNC-cut from 14-gauge steel✅ Made in the USA ✅ L-20 1/2" x D-3" x H-2 1/4" TOOLS NOT INCLUDED

Description Meet the HKS Fab 2-Tier MINI Modular Battery Storage — a compact, heavy-duty solution built to keep your shop organized without wasting wall space. Designed around our MINI 2-Tier Backplate, this system mounts directly to your wall and securely holds two batteries on the top tier and two on the bottom, giving you quick, visible access to your most-used power packs. Whether you’re running one brand or mixing setups across multiple tool lines, the MINI modular platform lets you custom-configure each tier independently. Mount your favorite combo — Milwaukee M18 up top and DeWalt 20V below, or maybe Makita 18V paired with Craftsman 20V — the choice is yours. Precision-cut from 14-gauge American steel and CNC-bent for strength, every unit is built to handle daily shop abuse. The wall plate features clean, slotted mounting holes for quick installation on standard stud spacing or metal pegboard setups. It’s compact, versatile, and 100% Made in the USA — engineered for professionals who demand organized efficiency from every inch of their workspace. Configuration Options The 2-Tier MINI Modular Battery Storage system supports interchangeable modules for a wide range of tool brands. Each tier can be outfitted independently with any combination of two-battery mounts from the following options: Milwaukee® M18 – 2 Battery Module Milwaukee® M12 – 2 Battery Module DeWalt® 20V – 2 Battery Module Makita® 18V – 2 Battery Module Craftsman® 20V – 2 Battery Module HART® 20V – 2 Battery Module Hercules® 20V – 2 Battery Module Hyper Tough® 20V – 2 Battery Module Ryobi® 18V – 2 Battery Module Bauer® 20V – 2 Battery Module RIDGID® 18V – 2 Battery Module Each brand-specific module slides into the MINI Backplane using our precision-fit modular slots and secures with hardware for a tight, rattle-free connection. Mix and match tiers to build a dual-brand charging wall that fits your workflow. Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L7.5" x W6" x H6" BATTERIES NOT INCLUDED

Description Take your modular setup to the next level with the HKS Fab 2-Tier MAX Modular Battery Storage — the ultimate high-capacity system for serious builders, mechanics, and pros. Based on our precision-cut 2-Tier Backplane, this configuration holds four batteries per tier (eight total batteries per unit) while allowing you to customize each level for different power-tool brands — or swap the bottom tier for our 3-Tool Holder Module to keep your drills, drivers, or impacts close at hand. Built from 14-gauge American steel, CNC-cut and bent for a precise, heavy-duty fit, the MAX system delivers rugged durability in a clean, space-efficient design. Each tier mounts securely using our modular slide-lock interface and installs easily with slotted wall holes for standard stud spacing or metal panels. Whether you’re running full Milwaukee M18s on top and DeWalt 20Vs below — or any mix of brands — the MAX system gives you true multi-brand flexibility in one tough, American-made platform. Proudly Made in the USA by HKS Fab. Configuration Options The 2-Tier MAX Modular Battery Storage system lets you build your perfect setup using any combination of modules below. Each tier can be configured independently: Modular Tool Holder – Holds up to 3 Power Tools (Bottom Tier Only) Milwaukee® M18 – 4 Battery Module Milwaukee® M12 – 4 Battery Module DeWalt® 20V – 4 Battery Module Makita® 18V – 4 Battery Module Craftsman® 20V – 4 Battery Module HART® 20V – 4 Battery Module Hercules® 20V – 4 Battery Module Hyper Tough® 20V – 4 Battery Module Ryobi® 18V – 4 Battery Module Bauer® 20V – 4 Battery Module RIDGID® 18V – 4 Battery Module Each brand-specific module locks into the backplane for a tight, rattle-free fit, giving you the freedom to mix brands, tools, and tiers exactly how you work. Features CNC Cut / CNC Bent Constructed from 14g steel Installs easily with basic hand tools Made in the USA by HKS Fab Dimension's L14" x W6" x H6" BATTERIES NOT INCLUDED